Log:
Ordina : Nome ↑   Scaricare   Valutazione   Size ↑  

Ampeg BA-210SP

Scaricare : 49 File Size : 639 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

AUCUNE PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE. BA-210SP Bassamp Cube with Digital Effects IMPORTANT SAFEGUARDS AND PRECAUTIONS: All Ampeg products are designed for continuous safe operation. Abiding by the following rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defea

Ampeg SVT810E/AV

Scaricare : 43 File Size : 716 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

The SVT-810E/AV can be "split” into two isolated 8 ohm, 4x10 cabinets via the jackplate connections. This allows each cabinet to be driven by a separate amplifier. Of course it may also be connected in the Mono Mode to create a single 4 ohm, 8x10 cabinet that may be powered by a single amplifier. The cabinet features an industrial strength grip bar and heavy duty recessed wheels. Skid rails are placed on the back of the enclosure to protect it while loading in and out of venues and vehicles. (P

Ampeg B2R

Scaricare : 33 File Size : 245 kb    Produttore : Ampeg  
Categoria : Ricevitore e l

5. BASS: This is the primary low frequency control which allows for 8dB of cut or boost at 50Hz. 6. ULTRA-MID: This is the primary midrange control. Rotate the control to the left of center for a “contoured” sound (more distant, less midrange output) or to the right of center for a pronounced (more upfront) tone. 7. TREBLE: This is the primary high frequency control which allows for 12dB of boost or 19dB of cut at 5kHz. 8. MASTER: Set the overall output level of the amplifier with this control.

Ampeg SVT-5 PRO

Scaricare : 29 File Size : 688 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

53. CLEAN EFFECTS LOOP SEND: When using an external effect on the Clean channel, connect this jack to the effect’s input by means of a shielded signal cable. 54. TUNER OUT: Use this jack to connect an electronic tuner to the amplifier. The signal at this jack is always present, even when the Mute is engaged, allowing for silent tuning as well as a non-interrupted monitor feed. 5 6 Connections SVT-5 PRO Bass Amplifier MONO BRIDGED: The SVT-5 PRO’s two internal amplifiers are bridged together to p

Ampeg BA-108

Scaricare : 29 File Size : 686 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

0 dB INPUT: The signal output from a passive instrument may be connected to this 1/4" input by means of a shielded instrument cable. 2. –15 dB INPUT: The signal output from an active instrument may be connected to this 1/4" input by means of a shielded instrument cable. 3. VOLUME: Use this to control the overall output level. It affects the preamp level to speaker and phone outputs. Use it wisely, and turn it down when making connections, putting on headphones, or trying something new. It does n

Ampeg ROCKET BASS B-200R

Scaricare : 23 File Size : 648 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

•DO NOTOPERATE NEAR ANYHEATSOURCE AND DO NOTBLOCK ANYVENTILATION OPENINGS ON THIS APPARATUS. FOR PROPER OPERATION, THIS UNITREQUIRES 3” (75mm) OF WELLVENTILATED SPACE AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET. •DO NOTUSE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS. •CLEAN ONLYWITH LINT-FREE DAMPCLOTH AND DO NOTUSE CLEANING AGENTS. •ONLYCONNECTPOWER CORD TOAPOLARIZED, SAFETYGROUNDED OUTLETWIRED TO CURRENTELECTRICALCODES AND COMPATIBLE WITHVOLTAGE, POW

Ampeg SVP-PRO

Scaricare : 22 File Size : 329 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

The SVP-PRO is the preamp section of our much-respected SVT-2 PRO. All of the features and controls of your SVP-PRO are covered in detail within the pages of this user’s guide. We recommend going over them before you use the preamp. Features In the world of high performance bass amps, Ampeg’s SVT amplifiers stand alone. Keeping with true Ampeg tradition, the SVP-PRO Bass Preamp offers you more performance and flexibility than any other preamp in its class. Listed below are some of the outstandin

Ampeg SVT-2

Scaricare : 22 File Size : 374 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

NOTE: In some areas the 1/4” speaker jacks are not acceptable for use on amplifiers capable of high output power levels. For this reason your amplifier may have been shipped with the 1/4” jacks sealed – use only the Speakon® jack for connecting your speakers. 38. This is a 1/4-20 weld-nut which can be used to provide additional support for the rear of the unit. 6 Some Suggested Settings* SVT-2 PRO Bass Amplifier PEAK / MUTE ULTRA LO BRIGHT ULTRA HI GAIN DRIVE BASS MIDRANGE FREQUENCY TREBLE MASTE

Ampeg BA-110

Scaricare : 17 File Size : 76 kb    Produttore : Ampeg  
Categoria : Strumenti Musicali

• Always keep the total speaker impedance at or above the rated load. • Unplug the amplifier before cleaning it. NEVER spray liquid cleaners onto the amplifier. Wipe it with a slightly dampened, lint-free cloth to remove dirt and film. • Do not use the amplifier if it has sustained damage to the chassis, controls, or power cord. Refer the unit to an authorized service center for inspection. • Amplifiers capable of producing high volume levels are also capable of inflicting permanent hearing loss

Ampeg SVPCL

Scaricare : 15 File Size : 332 kb    Produttore : Ampeg  
Categoria : Ricevitore e l

• DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS. • CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS. • ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS. • PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED. • UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UN





categorie