Log:

Hobart Welding Products CYBERSTICK OM-314

Scaricare : 14 File Size : 887 kb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

Duty Cycle And Overheating 5 Minutes Welding 5 Minutes Resting 3 Minutes Welding 7 Minutes Resting rduty1 5/95 – SB-002 120-B Duty Cycle is percentage of 10 minutes that unit can weld at rated load without overheating. Exceeding duty cycle can damage unit and void warranty. 30% Duty Cycle At 250 Amperes AC 50% Duty Cycle At 200 Amperes DC Overheating 0 15 A OR Minutes Reduce Duty Cycle OM-314 Page 10 2-3. Volt-Ampere Curves ssb1.1 10/91 – SB-002 696-A / SB–002 689-A The volt-ampere curves show

Hobart Welding Products CYBER PRO 302

Scaricare : 2 File Size : 951 kb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

. . . 1 ... 26. . . . . . . . . . . . . 187678 . . . . BAR, frame horizontal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ... 27. . . . . . . . . . . . . 190100 . . . . HOLDER, brush assembly (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . . . . . . . . . . . 190 103 . . . . . . HOLDER, brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . . . .

Hobart Welding Products CYBER PRO 252TS

Scaricare : 21 File Size : 951 kb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

Duty Cycle And Overheating Continuous Welding Duty Cycle is percentage of 10 minutes that unit can weld at rated load without overheating. If unit overheats, thermostat(s) opens, output stops, and cooling fan runs. Wait fifteen minutes for unit to cool. Reduce amperage or duty cycle before welding. Exceeding duty cycle can damage unit and void warranty. 100% Duty Cycle Overheating 0 15 A/V OR Reduce Duty CycleMinutes duty1 4/95 / Ref. SA-177 714-B CP302 CP252TS OM-259 Page 9 2-3. Volt-Ampere Cur

Hobart Welding Products CYBER FLEX 452

Scaricare : 2 File Size : 1 mb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

2 Jumper Links Move jumper links to match input voltage. Close access door, or go on to Section 3-13. Tools Needed: 2 1 Do not overtighten jumper link nuts. 230 VOLTS Ref. S-174 973-A 460 VOLTS 575 VOLTS 380 VOLTS 400 VOLTS 440 VOLTS Ref. S-174 975-A 220 VOLTS (FACTORY OPTION) 200 VOLTS Ref. S-174 976-A 230 VOLTS 460 VOLTS 3/8 in 3/8 in 380 VOLTS 520 VOLTS Ref. S-177 159 OM-277 Page 20 3-13. Connecting Input Power ST-800 103-B / Ref. ST-801 116 1 Input And Grounding Conductors See Section 3-11.

Hobart Welding Products CYBER FLEX 302

Scaricare : 1 File Size : 1 mb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

Routine Maintenance Disconnect power before maintaining. 3 Months Replace unreadable labels. Repair or replace cracked weld cable. Clean and tighten weld terminals. 6 Months Blow out or vacuum inside. During heavy service, clean monthly. OR 5-2. Fuse F1 Ref. ST-800 101-C Turn Off power before opening rear access door. 1 Fuse F1 (See Parts List For Rating) Fuse F1 protects control transformer from overload. If F1 opens, weld output and fan motor stops. Replace F1. 1 Tools Needed: 3/8 in 5-3. Tr

Hobart Welding Products CONTRACTOR 40D OM-474

Scaricare : 0 File Size : 2 mb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

Installing Welding Generator install1 12/99 – Ref. ST-800 652 / Ref. ST-800 477-A / ST-158 936-A / S-0854 1 2 Electrically bond generator frame to vehicle frame by metal-to-metal contact. GND/PE 3 4 Always ground generator frame to vehicle frame to prevent electric shock and static electricity hazards. 1 Generator Base 2 Metal Vehicle Frame 3 Equipment Grounding Terminal 4 Grounding Cable Use #10 AWG or larger insulated copper wire. If unit does not have GFCI receptacles, use GFCI- 2 protected

Hobart Welding Products CONTRACTOR 3225D

Scaricare : 3 File Size : 2 mb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

Connecting The Battery 1/2 in ST-156 011-A / Ref. ST-188 448 / S-0756 + – Connect Negative (–) Cable Last. Tools Needed: OM-480 Page 15 4-3. Installing Muffler Pipe exh_pipe2 12/96 – ST-154 089-A / ST-154 611 / Ref. ST-188 448 Stop engine and let cool. Do not blow exhaust toward air cleaner or air intake. Top View 1/2 in Tools Needed: 4-4. Engine Prestart Checks Ref. ST-800 159-D Full 1/2 in (13 mm) Full Diesel Valve Open Check all fluids daily. Engine must be cold and on a level surface. Fol

Hobart Welding Products CONTRACTOR 3025

Scaricare : 1 File Size : 2 mb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

Check oil level (see Section 4-2). Engine will not start if oil pressure is too low. Reset circuit breaker CB10 (see Section 7-8). Check coolant level and fan belt (see Section 4-2 and engine manual). Engine will not start if engine temperature is too high. Check and refill crankcase with proper viscosity oil for operating temperature, if necessary (see engine manual). Have Factory Authorized Service Agent check low oil pressure switch S2 and engine coolant temperature switch S3. Engine does not

Hobart Welding Products CHAMPION OM-945

Scaricare : 0 File Size : 2 mb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

7-1. Standard Receptacles If unit does not have GFCI receptacles, use GFCI- protected extension cord. 1 120/240 V 50 A AC Receptacle RC1 RC1 supplies 60 Hz single-phase power at weld/power speed. Maximum output is 10 kVA/kW. 2 120 V 20 A AC Duplex Receptacle RC2 3 120 V 20 A AC Duplex Receptacle RC3 RC2 and RC3 supply 60 Hz single- phase power at weld/power speed. Maximum output from RC2 or RC3 is 2.4 kVA/kW. 4 Supplementary Protector CB1 CB1 protects the ac receptacles from overload. If CB1 ope

Hobart Welding Products CHAMPION OM-493

Scaricare : 0 File Size : 2 mb    Produttore : Hobart Welding Products  
Categoria : Saldatrici

Part No. Mkgs. No. Description Quantity Figure 12-1. Main Assembly ... 1 . . . . . . . . . . . . . 181 881 . . GROMMET, neck filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ... 2 . . . . . . . . . . . . . 147601 . . CAP, tank screw-on w/vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ... 3 . . . . . . . . . . . . . 108 487 . . LABEL, warning: falling equipment. . . . . . . . . . . . . . . . . . . . . . . . . . .





categorie