valutazioni - 2, GPA: 4 ( )

Istruzioni per l'uso Dacor, Modello FHWC3055LSA

Produttore : Dacor
File Size : 1.59 mb
File Nome : 316902442en.pdf
Lingua di insegnamento: en
Vai a scaricare

Facilità d'uso

• Use an extinguisher only if: -You know you have a class ABC extinguisher, and you already know how to operate it. - The fire is small and contained in the area where it started. -The fire department is being called. -You can fight the fire with your back to an exit. CAUTION Always leave safety grills and filters in place. Without these components, operating blowers could catch onto hair, fingers and loose clothing. Electrical requirements IMPORTANT Observe all governing codes and ordinances. It is the customer’s responsibility: • to contact a qualified electrical installer. • to assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 – latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91-latest edition** and all local codes and ordinances. If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determines that the ground path is adequate. • Do not ground to a gas pipe. • Check with a qualified electrician if you are not sure range hood is properly grounded. • Do not have a fuse in the neutral or ground circuit. Installing the hood 5 IMPORTANT Save installation instructions for electrical inspector’s use. The range hood must be connected with copper wire only. The range hood should be connected directly to the fused disconnect (or circuit breaker) box through metal electrical conduit. Wire sizes must conform to the requirements of the National Electrical Code ANSI/NFPA 70 – latest edition”, or CSA Standards C22.1-94, Canadian Electrical Code Part 1 and C22.2 No.0-M91 – latest edition** and all local codes and ordinances. A U.L.- or C.S.A.-listed conduit connector must be provided at each end of the power supply conduit (at the range hood and at the junction box). Copies of the standards listed may be obtained from: * National Fire Protection Association Batterymarch Park Quincy, Massachusetts 02269 ** CSA International 8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575 Power requirement: 120V~, 60Hz, 15 or 20A branch circuit Intended use • Your range hood is intended for exhaust operation only. This range hood is not recommended to be used over indoor grills. Do not use it to exhaust hazardous or explosive materials or vapors. Parts supplied No. Part Qty. 1 Range hood 1 2 Upper and lower chimney 1 + 1 3 Upper bracket 1 4 Lower bracket 1 5 Collar 1 6 Recirculation kit (optional accessories) FHWRKT55LS 1 7 Bulb 20W, 120V~, GU10 (preassembled) 2 8 Long screw (4mm x 32mm) 8 9 Wall plug 8 10 Short screw (4mm x 12mm) 4 11 Wood screw (4mm x 50mm) 4 12 Stainless steel screw (3.5mm x 10mm) 2 13 Short screw (3.5mmx8mm) 2 14 10’ extension chimney kit (optional accessories) FHW10X55LS 1 15 Plantilla (estarcido) Assembly template (stencilled) 1 GB 6 Installing the hood Installing the hood IMPORTANT We recommend that two people carry out the installation. Pay attention to the procedure described in the assembl...

Questo manuale è adatto anche per i modelli :
Fans - FHWC3655LSA (1.59 mb)
Fans - FHWC3055LSA (1.59 mb)
Fans - FHWC3055LSA (1.59 mb)
Fans - FHWC3055LSA (1.59 mb)

Scrivi la tua opinione del dispositivo

Il messaggio
Il tuo nome :
Inserire le due cifre :