valutazioni - 5, GPA: 3.6 ( )

Istruzioni per l'uso Canon, Modello EF 85mm f/1.8 USM

Produttore : Canon
File Size : 1.7 mb
File Nome :
Lingua di insegnamento: svitenesfrdenldafi
Foto e specifiche   Canon  EF 85mm f/1.8 USM
Vai a scaricare

Facilità d'uso

1) Set the camera to ONE SHOT AF mode and press the shutter button halfway. 2) Keep the shutter button pressed halfway and turn the focusing ring to focus manually .. . 4. Aperture Setting Aperture settings are specified on the camera. 5. Infinity Distance Mark To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale .. . To make sure focus is precise, it is recommended that you check the focus in the viewfinder before shooting. 6. Infrared Index The infrared index corrects the focus setting when using monochrome infrared film. Focus on the subject manually, then adjust the distance setting by moving the focusing ring to the corresponding infrared index mark .. . Use a red filter also when you take the picture. • Switch the focus mode to MF to turn the focusing ring for adjustment. • The position of the infrared indices is based on film usage with a peak sensitivity of 800 nm and a red filter (such as Wratten 87). Using black and white infrared film with a different sensitivity may require a slightly different setting. Thus, it is recommended to take trial shots with the focusing ring set slightly to the left and then right of the appropriate index to find the best position. • Be sure to observe the manufacturer’s instructions when using infrared film. 7. Filter (sold separately) The filter screws onto the front of the lens. • If you need a polarizing filter, use Canon’s PL-C polarizing filter. Filter holder for the EF14mm f/2.8L USM This lens is constructed with a built-in, gelatin filter holder in the rear .. . To insert, simply cut the filter to the same dimensions (31 mm/1-1/4” . 31 mm/1-1/4”) as the white brackets, then slide the filter into the holder. 8. Hood The hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. Engage the hood attachment tabs on the lens with the tabs on the hood and turn the hood in the direction of the arrow to secure it to the lens. [Bayonet type] EF20mm f/2.8 USM, EF28mm f/1.8 USM and EF50mm f/1.4 USM (sold separately), and EF24mm f/1.4L USM and EF35mm f/1.4L USM (supplied with the lens). To fit the hood on the EF20mm f/2.8 USM, EF24mm f/1.4L USM, EF28mm f/1.8 USM or EF35mm f/1.4L USM, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood clockwise until the lens’s red dot is aligned with the hood’s stop position mark .. . When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it. Though there is no red dot on the hood for the EF50mm f/1.4 USM (ES-71II), the attachment procedure is the same. • Part of the picture may be blocked if the hood is not attached properly. • The hood can be reverse-mounted on the lens for storage. [Clip-on type] E...

Questo manuale è adatto anche per i modelli :
Videocamere - EF 50mm f/1.4 USM (1.7 mb)
Videocamere - EF 35mm f/1.4L USM (1.7 mb)
Videocamere - EF 28mm f/1.8 USM (1.7 mb)
Videocamere - EF 24mm f/1.4L USM (1.7 mb)

Scrivi la tua opinione del dispositivo

Il messaggio
Il tuo nome :
Inserire le due cifre :